IDEX部件编号: FL-003898
Individual multiband fluorescence bandpass filters that utilize Semrock’s patented single-substrate construction. These filters have extremely high transmission, steep and well-defined edges, and outstanding blocking between the passbands. All thin-film, hard-coated construction for unsurpassed performance and reliability.
比较产品
| Optical Specifications | Value |
|---|---|
| Transmission Band 1 |
Tavg > 93% 503.5 – 526.5 nm |
| Transmission Band 2 |
Tavg > 93% 560 – 615.5 nm |
| Transmission Band 3 |
Tavg > 93% 665.5 – 735.5 nm |
| Blocking Band 10 |
ODavg > 5 750 – 900 nm |
| Blocking Band 2 |
ODavg > 8 471 – 491 nm |
| Blocking Band 3 |
OD > 3.5 497.3 nm |
| Blocking Band 4 |
OD > 3.5 534 nm |
| Blocking Band 6 |
OD > 3.5 552.3 nm |
| Blocking Band 7 |
OD > 3.5 624.3 nm |
| Blocking Band 9 |
OD > 3.5 656.3 nm |
| Blocking Band 1 |
ODavg > 4 200 – 471 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 5 |
ODavg > 8 541.5 – 544.5 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 8 |
ODavg > 8 632.8 – 647.1 nm (Design specification – measurements are noise-floor limited). |
| Center Wavelength 1 |
515 nm |
| Center Wavelength 2 |
588 nm |
| Center Wavelength 3 |
700 nm |
| FWHM Bandwidth 1 (nominal) |
27.7 nm |
| FWHM Bandwidth 2 (nominal) |
60.7 nm |
| FWHM Bandwidth 3 (nominal) |
75.7 nm |
| Guaranteed Minimum Bandwidth 3 |
70 nm |
| General Filter Specifications | Value |
| Angle of Incidence |
0 ± 5 degrees |
| Cone Half-angle |
7 degrees |
| Optical Damage Rating |
Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours. |
| Physical Filter Specifications | Value |
| Transverse Dimensions (diameter) |
25 mm |
| Transverse Tolerance |
+ 0.0 / – 0.1 mm |
| Filter Thickness (mounted) |
3.5 mm |
| Filter Thickness Tolerance (mounted) |
± 0.1 mm |
| Filter Thickness (unmounted) |
2.0 mm |
| Filter Thickness Tolerance (unmounted) |
± 0.1 mm |
| Clear Aperture |
≥ 22 mm |
| Scratch-Dig |
60-40 |
| Orientation |
Arrow on ring is preferred direction of propagation of light |
FL-007925
