IDEX部件编号: FL-004441
Individual multiband fluorescence bandpass filters that utilize Semrock’s patented single-substrate construction. These filters have extremely high transmission, steep and well-defined edges, and outstanding blocking between the passbands. All thin-film, hard-coated construction for unsurpassed performance and reliability.
比较产品
| Optical Specifications | Value |
|---|---|
| Transmission Band 1 |
Tavg > 85% 352 – 404 nm |
| Transmission Band 4 |
Tavg > 93% 626 – 644 nm |
| Transmission Band 2 |
Tavg > 93% 461 – 487.5 nm |
| Transmission Band 3 |
Tavg > 93% 543 – 566 nm |
| Blocking Band 11 |
OD > 3.5 618.5 nm |
| Blocking Band 12 |
OD > 3.5 651.8 nm |
| Blocking Band 3 |
OD > 3.5 409 nm |
| Blocking Band 5 |
OD > 3.5 455.5 nm |
| Blocking Band 6 |
OD > 3.5 493.5 nm |
| Blocking Band 8 |
OD > 3.5 536.5 nm |
| Blocking Band 9 |
OD > 3.5 573 nm |
| Blocking Band 14 |
ODavg > 4 850 – 925 nm |
| Blocking Band 4 |
ODavg > 8 414 – 450 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 10 |
ODavg > 8 580 – 611 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 15 |
ODavg > 2 925 – 1100 nm |
| Blocking Band 7 |
ODavg > 8 499.5 – 530 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 13 |
ODavg > 8 661 – 850 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 1 |
ODavg > 6 200 – 300 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 2 |
ODavg > 6 300 – 341.5 nm |
| Center Wavelength 3 |
554.5 nm |
| Center Wavelength 4 |
635 nm |
| Center Wavelength 2 |
474.3 nm |
| Center Wavelength 1 |
378 nm |
| FWHM Bandwidth 4 (nominal) |
22.7 nm |
| FWHM Bandwidth 2 (nominal) |
30.2 nm |
| FWHM Bandwidth 1 (nominal) |
57.6 nm |
| FWHM Bandwidth 3 (nominal) |
27.5 nm |
| Guaranteed Minimum Bandwidth 4 |
18 nm |
| General Filter Specifications | Value |
| Angle of Incidence |
0 ± 5 degrees |
| Cone Half-angle |
7 degrees |
| Optical Damage Rating |
Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours. |
| Physical Filter Specifications | Value |
| Transverse Dimensions (diameter) |
25 mm |
| Transverse Tolerance |
+ 0.0 / – 0.1 mm |
| Filter Thickness (mounted) |
5.0 mm |
| Filter Thickness Tolerance (mounted) |
± 0.1 mm |
| Filter Thickness (unmounted) |
3.5 mm |
| Filter Thickness Tolerance (unmounted) |
± 0.1 mm |
| Clear Aperture |
≥ 21 mm |
| Scratch-Dig |
60-40 |
| Orientation |
Arrow on ring is preferred direction of propagation of light |
FL-007925
FL-421008
